| Size |
2.180 OR 2.330 x 1.750 wide |
| Gunnells |
75 x 75 x 2 mm medium tensile galv RHS |
| Chassis Runners 2 WD |
65 x 35 x 2 mm medium tensile galv RHS |
|
4 WD |
50 x 25 x 3 mm medium tensile galv RHS |
| Cross Runners |
40 x 40 x 1.6 mm medium tensile galv RHS |
| Rear Cross Runner |
65 x 35 x 2 mm medium tensile galv RHS |
| Headboard Frame |
40 x 40 x 2 mm medium tensile galv RHS |
| Headboard Uprites |
40 x 40 x 2 mm medium tensile galv RHS |
|
Drawbar Droppers |
75 x 50 x 6 mm medium tensile galv RHS |
|
Drawbar Bottom Runner |
75 x 50 x 6 mm medium tensile galv RHS |
|
Drawbar Tongue |
75 x 16 mm medium tensile steel |
|
Drawbar Ball |
17/8" chrome plated, rated at 1500 kg |
|
Drawbar Rating |
1000 kg unbraked, 1500 kg braked |
|
Dropside & Tail door |
Frame 25 x 25 x 3 mm MSA hot dipped galvanized |
| |
Hinges 40 x 6 mm MSF hot dipped galvanized |
|
Headboard Timber |
180 x 28 dressed treated pine |
|
Side & Tail door Timber |
21 mm BB grade plywood stained with golden NFII |
|
Deck |
21 mm BD grade plywood oiled with linseed oil |
| |
Fastened with 6 mm countersunk decking screws |
|
Tail Lights |
Protected in a 2 mm box with rear crash bars |
|
Mudguards |
1.2 mm galvanized bolt on, mud-flaps on rear |
|
Steps |
Step fitted to each front corner |
